Commissioning
116
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
Maximum admissible
tongue load
Tractor's coupling device
Machine's
drawgear
4000 kg -
40 km/h
2000 kg - > 40 km/h
Tow hook (hitch hook)
ISO 6489-1
Drawbar lug (hitch ring)
ISO 20019
Drawbar lug (hitch ring)
ISO 5692-1
Draw pin (Piton-Fix)
ISO 6489-4
Drawbar lug (hitch ring)
ISO 5692-1
4000 kg -
40 km/h
2000 kg - > 40 km/h
Ball-type coupling 80
Shell 80
Tab. 13
7.2.2.2 Calculate actual D
C
value for combination to be coupled
WARNING
Risk to people due to failure of components caused by breaking
coupling devices between tractor and machine in case of
incorrect use of the tractor!
Only combine compatible coupling devices and drawgears.
Calculate the actual D
C
value of your combination consisting of
tractor and rigid drawbar trailer to check the coupling device of
your tractor for the required D
C
value. The actual calculated D
C
value for the combination must be less than or equal to (≤) the
specified D
C
value of the coupling device of your tractor and the
drawgear of the rigid drawbar trailer. If this is not the case, the
admissible towing capacity for your tractor must be calculated. In
each case, the lowest D
C
value shall be relevant.
Calculate the admissible towing capacity of your tractor if the
calculated D
C
value for the combination is higher than the
specified D
C
value of the coupling device of your tractor or of the
drawgear of the rigid drawbar trailer. This calculated towing
capacity must not be exceeded when charging your rigid
drawbar trailer.
The actual D
C
value of a combination to be coupled is calculated as follows:
D
C
= g x T x C
T + C
Fig. 89 D
C
value of combination
