Service and maintenance of machine
158
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
12.5.4.2 Change oil
1. Secure the machine against rolling.
2. Align the machine in horizontal position.
3. Place a drip tray beneath the gearbox
(capacity approx. 15 litres).
4. Unscrew oil drain plug (1) and ventilation
screw (2).
5. Wait for the oil to stop draining out of the oil
drain opening.
6. Screw in again and tighten oil drain plug (1)
(use sealant).
7. Remove the inspection plug (3).
8. Top up 13 litres of oil through the filler neck
(4) until the oil level becomes visible at the
tap hole.
9. Screw the inspection plug in again.
10. Clean and screw in the ventilation screw
(2).
11. Check the oil level after 5 service hours.
Fig. 111
