Design and function
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
63
Fully filled mixing container – high amount of load of mixing auger
1. Switch the tractor's p.t.o. shaft off.
2. Prepare changing of gear level:
Turn the tractor engine off if the p.t.o. shaft drive of your tractor is slowed down during
coasting and when stationary, after the p.t.o. shaft has been switched off.
In this state, the p.t.o. shaft can move freely.
Select the function "Switched-off p.t.o. shaft freely movable with the tractor engine running"
at your tractor if your tractor is equipped with this function.
3. Use the switchgear to change the gear level via the mechanical / electrical remote control set.
4. Switch the p.t.o. shaft of the tractor on again.
During restarting, changing gear level is initiated in the switchgear.
5.5
Spur gear for driving mechanism with on-board hydraulic system
without switchgear
Optional extra
If the machine is equipped with an on-board
hydraulic system, the gear pump (1) generates
the volume flow required for executing the
hydraulic functions.
The gear pump (1) is powered by the spur gear
(2) with the propeller shaft powered.
Fig. 36
