BRP Lynx Commander GT 1200 4-TEC Comfort, Operator'S Manual

Page: 71 / 164

FUEL AND OIL
Fuel Requirements
NOTICE
Always use fresh gaso-
line. Gasoline will oxidize; the re-
sult is loss of octane, volatile com-
pounds, and the production of gum
and varnish deposits which can
damage the fuel system.
Alcohol fuel blending varies by coun-
try and region. Your vehicle has been
designed to operate using the recom-
mended fuels, however, be aware of
the following:
– Use of fuel containing alcohol above
the percentage specified by gov-
ernment regulations is not recom-
mended and can result in the fol-
lowing problems in the fuel system
components:
• Starting and operating difficul-
ties.
• Deterioration of rubber or plastic
parts.
• Corrosion of metal parts.
• Damage to internal engine parts.
– Inspect frequently for the presence
of fuel leaks or other fuel system
abnormalities if you suspect the
presence of alcohol in gasoline ex-
ceeds the current government reg-
ulations.
– Alcohol blended fuels attract and
hold moisture which may lead to
fuel phase separation and can result
in engine performance problems or
engine damage.
Recommended Fuel
Use unleaded gasoline containing MA-
XIMUM 10% ethanol. The gasoline
must have the following minimum oc-
tane requirements:
FUEL
TYPE
ENGINE
MINIMUM
OCTANE
RATING
Fuel
which
may
contain
up to
10% MAX
ethanol
600 HO
E-TEC
800 R
E-TEC
1200
4-TEC
900 ACE
95 E10
NOTICE
Use octane rating accord-
ing to fuel type. Never experiment
with other fuels. Engine or fuel sys-
tem damages may occur with the
use of an inadequate fuel.
Fuel Antifreeze Additives
When using oxygenated fuel, addi-
tional gas line antifreeze or water ab-
sorbing additives are not required and
should be not used.
When using non-oxygenated fuel, iso-
propyl base gas line antifreeze can
be used in a proportion of 150 ml
(5 U.S. oz) of gas line antifreeze added
to 40 L (10.6 U.S. gal.) of gas.
This precaution is in order to reduce the
risk of frost buildup in carburetors or
other fuel system components which
may lead, in certain cases, to severe
damage to engine.
NOTE: Use only methyl hydrate free
gas line antifreeze.
Fueling Procedure
Unscrew to fill up tank then fully
tighten.
_______________
69