BRP Lynx Commander GT 1200 4-TEC Comfort, Operator'S Manual

Page: 118 / 164

MAINTENANCE PROCEDURES
mmo2007-009-023_a
TYPICAL
1. Knobs
Taillight Bulb Replacement
1. Carefully pull taillight assembly by
both ends at the same time.
fmr2011-001-003
NOTICE
Plastic retaining pins
may break if taillight assembly is
forced sideways. Avoid sideways
movement when pulling taillight
out.
NOTICE
Do not pull taillight hous-
ing out too far to avoid damaging
wiring.
2. Remove lamp socket from taillight
assembly.
2.1 Turn socket counterclock-
wise.
2.2 Pull socket out.
3. Replace bulb.
4. Secure socket into taillight assem-
bly.
5. Push taillight assembly back into
place.
NOTE: Led taillight: leds cannot be re-
placed.
If led taillight is failed change taillight
assembly.
Fasten new taillight by
screws.
116
______________