CONTROLS, INSTRUMENTS AND EQUIPMENT
RF D.E.S.S. (Digitally Encoded
Security System)
The tether cord cap has an integrated
D.E.S.S. key to provide you and your
snowmobile with the equivalent secu-
rity of a conventional lock key.
The D.E.S.S. key contains an electronic
chip which features a unique perma-
nently memorized digital code.
Your authorized Lynx dealer has pro-
gramed the D.E.S.S. of your snowmo-
bile to recognize the D.E.S.S. key in the
tether cord cap to allow vehicle opera-
tion.
If another tether cord is used without
programming the D.E.S.S., the engine
will start but will not reach drive pulley
engagement speed to move vehicle.
Make sure the tether cord cap is free of
dirt or snow.
D.E.S.S. Flexibility
The D.E.S.S. of your snowmobile can
be programmed by your authorized
Lynx dealer to accept up to 8 different
keys.
We recommend the purchase of ad-
ditional tether cords from your au-
thorized Lynx dealer.
If you have
more
than
one
D.E.S.S.-equipped
Lynx snowmobile, each can be pro-
grammed by your authorized Lynx
dealer to accept the other vehicles
D.E.S.S. keys.
D.E.S.S. Key Types
Two types of keys can be used:
– Normal key
– Learning key.
To ease key type recognition, the
tether cord comes in different colors.
KEY TYPE
COLOR
Normal
Gray
Learning
Green
The Lynx learning key, limits the speed
of the snowmobile and the engine
torque, therefore enabling first time
users and less experienced operators
to learn how to operate the snowmo-
bile while gaining the necessary confi-
dence and control.
NOTE:
The initial learning key pro-
gramming
can
limit
the
speed
to
40 km/h (25 MPH)
or
70 km/h
(43 MPH). Refer to your authorized
Lynx dealer to modify this setting.
Refer to
OPERATING MODES
subsec-
tion for details.
6) Emergency Engine
Stop Switch
The emergency engine stop switch is
located on the RH side of handlebar.
Push-pull type switch.
To stop the engine in an emergency,
select OFF position (down) and simul-
taneously apply the brake. To restart,
button must be at the ON position (up).
mmo2016-008-202_a
OFF POSITION
To allow engine starting, the switch
must be in the ON position (UP).
_______________
41
Summary of Contents for Lynx Commander GT 1200 4-TEC Comfort
