BRP Lynx Commander GT 1200 4-TEC Comfort, Operator'S Manual

Page: 106 / 164

MAINTENANCE PROCEDURES
WARNING
Use only DOT 4 brake fluid from a
sealed container. To avoid serious
damage to the braking system, do
not use fluids other than the rec-
ommended one, nor mix different
fluids for topping up.
NOTICE
Brake fluid can damage
painted and plastic parts. Handle
with care. Rinse thoroughly in case
of spillage.
Brake Fluid Level
Place vehicle on a level surface.
Check brake fluid (DOT 4) in reservoir
for proper level. Add fluid (DOT 4) as
required.
WARNING
Use only DOT 4 brake fluid from a
sealed container. To avoid serious
damage to the braking system, do
not use fluids other than the rec-
ommended one, nor mix different
fluids for topping up.
mmo2008-008-018_a
1. Minimum
2. Maximum
3. Operating range
NOTICE
Brake fluid can damage
painted and plastic parts. Handle
with care. Rinse thoroughly in case
of spillage.
Gearbox Oil
Recommended Gearbox Oil
RECOMMENDED GEARBOX OIL
XPS SYNTHETIC GEAR OIL (75W 140
hypoid) (P/N 619 590 182)
NOTICE
The gearbox oil have to
meet requirements of API GL 5 class.
The gearbox of this snowmobile has
been developed and validated using
the XPS™ Synthetic gear oil. BRP
strongly recommends the use of its
XPS Synthetic gear oil at all times.
Damages caused by oil which is not
suitable for the gearbox will not be
covered by the BRP limited war-
ranty.
Gearbox Oil Level
With the vehicle on a level surface,
check the oil level by removing the
check plug on the left side of gearbox.
NOTE: It is important that the body of
the vehicle is in horizontal plane.
Oil level must reach the threaded
hole's lower edge.
NOTE: Oil level is allowed to be 2 mm
below the lower surface of the check
hole.
mmo2009-004-033_a
1. Check plug
To add oil, proceed as follows:
1. Remove the filler cap.
104
______________