Brother PJ-822, User Manual

Page: 156 / 199

Option Description
1.9 ips / 48 mm/s
2.7 ips / 70 mm/s
3.5 ips / 90 mm/s This setting balances speed and image quality. Select
this option when printing standard documents.
Fast (Draft Quality) Speed priority mode. Select this option when printing
documents containing bold text.
Fast (Line Conversion) Speed priority mode. Select this option when printing
documents with ruled pages or bold text.
Stencil Paper Mode
This mode is suitable for printing on stencil paper. Turn this setting on when printing on stencil paper.
Skip Perforation
Leaves a one-inch (25.4 mm) margin at the top and bottom of the paper. Use it when printing on perforated
roll paper so that the printer does not print on the perforation.
Dash Line Print
Prints dash lines between pages, which is useful when printing on roll paper. Set Form Feed Mode to Fixed
Page , and then select Enable . Note that dash lines are printed on the paper; they are not punched into the
paper.
Advanced (1) Tab
Roll/Fanfold Option
Specify the setting for using the optional roll printer case. Depending on the selected option, you can adjust
the feed value or amount of paper retraction for the roll printer case.
Option Description
Roll Printer Case (With Anti Curl) Select this option when using the anti-curl mechanism
while using the roll printer case.
Roll Printer Case (Without Anti Curl) Select this option when not using the anti-curl
mechanism while using the roll printer case.
Roll Printer Case (Short Feed) Using the roll printer case with paper passed through
the anti-curl mechanism causes the paper to have
pressure marks. Use this option to make sure the
pressure marks are not printed.
Custom Option When using a case other than the roll printer case, you
can customize the feed distance before and after
printing starts.
No Select this option when not using the roll printer case.
Tear Distance Adjust
Adjust the Tear Bar tear-off position for paper media. This setting is available when Roll/Fanfold Option is set
to Roll Printer Case (With Anti Curl) , Roll Printer Case (Without Anti Curl) , or Roll Printer Case (Short
Feed) .
Feed Distance Adjust
Specify the amount of paper fed after printing. This setting is available when Roll/Fanfold Option is set to
Custom Option .
Start Position Adjust
Specify the adjustment value to align the leading edge of the paper with the appropriate position. This setting
is available when
Roll/Fanfold Option is set to Custom Option .
Cut Pause Time
Specify the waiting time for cutting between pages.
152