Brother PJ-822, User Manual

Page: 151 / 199

SSID (Network Name)
Clicking Search displays the available SSIDs in a separate dialog box.
Channel
Displays the automatically selected channel.
Authentication Method/Encryption Mode
The supported encryption modes for the authentication methods are shown in the table below.
Authentication Method Encryption Mode
Open System None / WEP
Shared Key WEP
WPA3-SAE AES
WPA/WPA2-PSK/WPA3-SAE TKIP+AES / AES
EAP-FAST/NONE TKIP+AES / AES
EAP-FAST/MS-CHAPv2 TKIP+AES / AES
EAP-FAST/GTC TKIP+AES / AES
PEAP/MS-CHAPv2 TKIP+AES / AES
PEAP/GTC TKIP+AES / AES
EAP-TTLS/CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAPv2 TKIP+AES / AES
EAP-TTLS/PAP TKIP+AES / AES
EAP-TLS TKIP+AES / AES
To specify higher level security settings: When performing certificate verification with EAP-FAST, PEAP,
EAP-TTLS, or EAP-TLS authentication methods, the certificate cannot be specified from the Printer Setting
Tool. After the printer is configured to connect to the network, specify the certificate by accessing the printer
from a web browser. Installation of the authentication certificate can also be performed with the Printer
Setting Tool by going to the menu bar:
File > Install Certificates .
WEP Key
You can specify a setting only when WEP is selected as the encryption mode.
Passphrase
You can specify a setting only when WPA/WPA2-PSK/WPA3-SAE is selected as the authentication method.
User ID/Password
You can specify settings only when EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the printer from a web browser, and then
specify the certificate.
Display the key and password on-screen
If this checkbox is selected, keys and passwords are displayed in plain (non-encrypted) text.
Wireless Direct Tab (PJ-883)
Wireless Direct Settings
SSID/Network Key Generation
Select the AUTO or STATIC option.
147