Brother PC-8200 User Manual Download Page 97

Page: 97 / 180

If the memory is full and no more patterns can be saved

To delete a pattern that is already saved in the memory, touch
the “DELETE” key; to cancel the saving of a pattern, touch the
“CANCEL” key.

Erasing a pattern

1. Touch the “DELETE” key.

This indicates a pocket which has a pattern saved in it.

If you touch pockets, the pattern which is saved in that
pocket will be displayed.

Touch this key to delete a saved pattern.

Touch this key to cancel the erasing of a saved pattern.

2. Touch a pocket key to select the pattern to delete, and then

touch the “DELETE” key.

3. Touch the “CONFIRM” key.

The new pattern will then be saved automatically.

To cancel the deleting of a pattern, touch the “CANCEL”
key.

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands