Brother PC-8200 User Manual Download Page 88

Page: 88 / 180

DECORATIVE STITCHES

1. Touch the “CHARACTER/DECORATIVE

STITCH” key.

2. Touch the “

” key.

The decorative stitch pattern selection screen
will be displayed.

Pattern selection keys

Touch this key to change the thread tension.

Touch this key to select single or repeat
sewing. (Refer to page 89.)

Touch this key to change the pattern size.
(Refer to page 89.)

Touch this key to move to the next screen.

Touch this key to return to the previous
screen.

An advice screen will appear if you touch this
key while sewing. (Refer to page 39.)

3. Select the pattern.

Touch the “

” key to display the next

decorative stitch pattern selection screen.

3 4

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands