Brother PC-8200 User Manual Download Page 107

Page: 107 / 180

105

Frame patterns are created by combining the
desired frame and type of stitch.

1. Touch the “

” key. The frame pattern

selection screen will be displayed.

If another type of pattern such as characters
was selected previously or if a memory card
has been inserted, touch the “EMBROIDERY”
key first and then touch the frame pattern key.

2. Select the desired shape for the frame. The

frame pattern will be selected and the stitch
pattern selection screen will be displayed.

If you touch the “RETURN” key, the previous
screen will be displayed.

3. Select the desired type of stitch to form the

frame. The combined pattern is then shown
on the LCD screen.

Selecting frame patterns

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands