Brother PC-8200, User Manual

Page: 57 / 180

55
5
3
5. Start the machine while holding the end of the upper thread
gently.
* The machine will sew a reinforcement stitch and stop
automatically after sewing is completed.
* If you touch the automatic thread cutting key prior to sewing,
the machine cuts both threads automatically after sewing is
completed.
* If the fabric will not feed (for instance, because it is too
thick), touch the “
” stitch length setting key to increase
the stitch length.
Thick fabrics
1
2
Place another piece of fabric or cardboard at the back as thick
as original. This sets the presser foot to the same height and
allows for easier feeding.
1 Presser foot
2
Cardboard
Changing the bar tack stitch length
3 1 2
Touch the “ ” and “ ” stitch length setting keys to adjust
the stitch length.
1
“AUTO” length 0.4 mm (1/64”)
2
“ ” : Longer
3 “ ” : Shorter
* If the fabric will not feed (for instance, because it is too
thick), touch the “
” stitch length setting key to increase
the stitch length.
Changing the bar tack stitch width
1 2 3
Touch the “ ” and “ ” stitch width setting keys to adjust
the stitch width.
1 “AUTO” width 2.0 mm (1/16”)
2 “ ”: Wider
3
“ ”: Narrower