Brother PC-8200 User Manual Download Page 151

Page: 151 / 180

149

1. Touch the “EDIT” key.

The edit screen will be displayed. Move the “

” to the

location of the point you would like to correct and then make the
correction.

Touch this key to move part of or all of the pattern.

Touch this key if you would like to insert a point.

Touch this key to move the “

” back to the starting

position.

Touch this key to move the “

” back one point.

Touch this key to move the “

” forward one point.

Touch this key to move the “

” to the last point.

EDITING AN EXISTING “

”

5 6

1. Touch the “

”, “

” or “

” key to move the

“

” to the point which you would like to move.

2. Touch the 8 directional arrow keys to move the point.

Moving a point

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands