71
FLAT FELL SEAM
J
Use for reinforcing seams and finishing edges neatly.
1. Attach presser foot “J”. Sew the finish line, then cut half of
the seam allowance from the side that the flat fell seam will
lie.
1
About 1.2 cm (1/2”)
2
Reverse side
*
When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
2. Spread out the fabric along the finish line.
1
Finish line
2
Reverse side
3. Lay both seam allowances to the shorter one’s (cut one)
side and iron them.
1
Reverse side
4. Fold the longer seam allowance around the shorter one, and
sew the edge of the fold.
1
Reverse side
Summary of Contents for PC-8200
