Brother PC-8200 User Manual Download Page 15

Page: 15 / 180

HOW TO USE THE LANGUAGE SELECTION KEY

You can use the “

” key to easily change the display language for all the keys and

messages on the LCD screen to the language you need.

1. Touch the “OPERATION GUIDE” key.

2. Touch the “

” key.

3. The language display screen will then appear.

Touch the key which corresponds to the
desired language.

Example: To change the display language to

Spanish

1. Touch the “

” key.

2. Touch “ESPAÑOL (SPANISH).

This will change the language setting to
Spanish.

3. The display will then return to the screen

which was previously being displayed.

Note

When the “

” key is used to set the

display language, error messages will also be
displayed in the language selected.

The display language can be selected from a
list of 13 languages (English, German,
French, Italian, Dutch, Spanish, Danish,
Norwegian, Finnish, Swedish, Portuguese,
Turkish and Chinese).

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands