Brother PC-8200 User Manual Download Page 144

Page: 144 / 180

142

Preparation:

Attach the embroidery unit.

Make sure that the power is turned off before doing this.

1. Touch the “MEMORY RECALL” key.

A screen such as the left will be displayed.

2. Touch the “EMBROIDERY” key.

The “

” symbol indicates a pocket which has a pattern saved

in it. Touch the pocket to display the saved pattern.

The display will indicate that the patterns are saved on the
memory card. Touch after inserting the memory card on
which the pattern is saved.

Touch this key to delete the saved pattern.

Touch this key to retrieve the saved pattern.

3. Touch the pockets in order to retrieve the desired patterns,

and then touch the “RETRIEVE” key.

4. The characters or patterns will then be retrieved.

RETRIEVING AN EMBROIDERY PATTERN

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands