Brother PC-8200, User Manual

Page: 9 / 180

1 Bobbin (3) 136492-101
2 Seam ripper X54243-001
3 Button fitting foot “M” 130489-001
4 Scissors 184783-001
5 Chalk pen 184944-001
6 Cleaning brush XA4527-001
7 Eyelet punch 135793-001
8 Screwdriver (Large) X55467-051
9 Screwdriver (Small) X55468-051
10 Spool cap (Small) 130013-003
11 Spool cap (Large) 130012-003
12 Extra spool pin* XA3336-051
13 Spool felt X57045-001
14 Disc-shaped screwdriver XA2005-051
15 Walking foot* X80926-001
16 Side cutter X80943-001
17 Embroidery set (Regular) SA422 X80903-002
18 Embroidery frame (Regular) XA2171-001
19 Embroidery sheet (Regular) XA2212-001
20 Net* 127610-000
21 Embroidery set (Large) SA423 X80902-002
22 Embroidery frame (Large) XA2168-001
23 Embroidery sheet (Large) XA2209-001
24 Embroidery set (Small) SA421 X80904-102
25 Embroidery frame (Small) XA2174-001
26 Embroidery sheet (Small) XA2215-101
27 Screw* 132730-251
28 Foot controller 234522-001
29 Embroidery unit —
30 Hard case XA1821-001
7
OTHER INCLUDED ACCESSORIES
1 2 3
4 5 6
7 8 9
10 11 12
20
15
16
28 29 30
18
17
19
22 23
25 26
21
24
No. Part Name
Part Code
U.S.A. Others
* Use the same screw when installing both the
side cutter and the walking foot.
* If using special threads which wind quickly off
the thread spool, place a net on the spool
before using.
* If using the walking foot,
please refer to the
explanatory sheet which is
inserted in the instruction
book.
* The extra spool pin which is
provided as an accessory
should be attached to the
end of the bobbin winder
shaft during use.
Note (For U.S.A. only)
Foot controller: Model J2
This foot controller can be used for sewing
machine model PC-8200.
13 14
27