Brother PC-8200 User Manual Download Page 105

Page: 105 / 180

103

SELECTING AND SEWING PATTERNS

How to combine characters

1. Select the character required.

ABC

If another screen is being displayed, touch the
“EMBROIDERY” key before selecting the
character.

2. Combine characters. (Refer to page 85.)

Touch this key to change the thread tension
and the stitch density. (Refer to page 27 and
page 115.)

Touch this key when you want to change the
color of each character sewn. When displayed
in reverse, the machine will stop after each
character is embroidered.

Touch this key if the thread breaks during
sewing or if you would like to sew again from
the beginning. (Refer to page 121.)

Touch this key to move the sewing position.
(Refer to page 116.)

Selecting alphabetical characters

Summary of Contents for PC-8200





















































































































































































Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands

Brother PC-8200, User Manual

Search results

Summary of Contents for PC-8200

Reviews:

Related manuals for PC-8200

Brands by name

Popular brands