manualshive.com logo in svg

Brother P-Touch E850TKW, User Manual

The Brother P-Touch E850TKW offers exceptional versatility and professional label printing. With its user-friendly interface, this high-quality label printer ensures precision and efficiency in any work environment. Discover the full potential of your device by downloading the free user manual from manualshive.com to maximize your labeling capabilities.

Share
Download
background image

Troubleshooting 

200

22

The label or tube is not printed 
correctly, or the print result of the 
tube is not satisfactory (faint or 
smudged ink).

Remove the tape cassette or ribbon cassette and reinstall it, pressing it 
firmly until it locks into place.

If the label print head is dirty, clean it with a dry cotton swab (see 

Cleaning 

the Print Head

 on page 184) or optional print head cleaning cassette 

(TZe-CL6 for label print head only).

If the quality of the printed characters is poor even after wiping the label print 
head, wipe the label roller with a dry cotton swab. See 

Cleaning the Label 

Roller

 on page 185.

If the tube print head is dirty, clean it with a dry cotton swab. See 

Cleaning 

the Print Head

 on page 184.

If the tube or tube cleaner is dirty, replace the tube cleaner. For more 
information about replacing the tube cleaner, see 

Replacing the Tube 

Cleaner

 on page 187.

The rollers may be worn and need to be replaced. For more information 
about replacing the rollers, see 

Replacing the Rollers for Tubes

 

on page 188.

Try changing one of the following settings using the [

Tube Settings

] tab in 

[

Device Settings

] in the “

Printer Setting Tool

” or using the P-touch 

keyboard to select [

Settings

] - [

Tube Adjustment

] in the Home screen.

• Change the printing speed.

If you use the P-touch in an environment with a temperature of 20°C or 
lower, we recommend setting [

Print Speed

] to [

Better Quality

].

• Change the feeding pressure.

If the characters are faint, change [

Feeding Pressure

] to a stronger 

setting.

• Change the printing density.

If the characters are faint, change [

Print Density

] to a higher setting.

For more information, see 

Tube Settings Tab

 on page 116 or 

Adjusting 

the Tube Print Settings

 on page 47.

The fed tube is dirty.

Replace the tube cleaner. For more information about replacing the tube 
cleaner, see 

Replacing the Tube Cleaner

 on page 187.

Problem

Solution

Summary of Contents for P-Touch E850TKW
































































































































































































































































Reviews:

No comments

Related manuals for P-Touch E850TKW

Tassimo TAS 40xx User Manual preview
TAS 40xx
Brand: Tassimo Pages: 14
Bartscher Aurora 22 Manual preview
Aurora 22
Brand: Bartscher Pages: 25
Calphalon INTELLICRISP CKCLWF1 User Manual preview
INTELLICRISP CKCLWF1
Brand: Calphalon Pages: 2
Magic Chef MCIM22TS User Manual preview
MCIM22TS
Brand: Magic Chef Pages: 3
N&W Global Vending Kobalto Installation Operation & Maintenance preview
Kobalto
Brand: N&W Global Vending Pages: 72
Tescoma Teo 646622 Instructions For Use preview
Teo 646622
Brand: Tescoma Pages: 4
Regal Ware KITCHEN PRO K6725 Manual preview
KITCHEN PRO K6725
Brand: Regal Ware Pages: 62
Nostalgia Electrics RSM702COKE Instructions And Recipes Manual preview
RSM702COKE
Brand: Nostalgia Electrics Pages: 24
Krups SUPERIORE Instructions For Use Manual preview
SUPERIORE
Brand: Krups Pages: 15
G3 Ferrari Nessy Manual preview
Nessy
Brand: G3 Ferrari Pages: 18
Caffitaly System S32R Instruction Book preview
S32R
Brand: Caffitaly System Pages: 64
Taurus ALPATEC MG 12 LEGEND Manual preview
ALPATEC MG 12 LEGEND
Brand: Taurus Pages: 60
Gaggia New Baby Dose Operating Instructions Manual preview
New Baby Dose
Brand: Gaggia Pages: 55
Melitta Caffeo Solo & Perfect Milk Operating Instructions Manual preview
Caffeo Solo & Perfect Milk
Brand: Melitta Pages: 276
TurboTronic ZESPRESSO TT-CM23 Instruction Manual preview
ZESPRESSO TT-CM23
Brand: TurboTronic Pages: 16
Oster 2 lb. EXPRESSBAKE recip User Manual & Bread Recipes preview
2 lb. EXPRESSBAKE recip
Brand: Oster Pages: 76
STARBUCKS BARISTA AROMA SOLO User Manual preview
BARISTA AROMA SOLO
Brand: STARBUCKS Pages: 40
Salton IM2096 Instruction Booklet preview
IM2096
Brand: Salton Pages: 8

Brands by name

Popular brands

Load more brands