Brother P-Touch E850TKW Page 193 User Manual Download

Page: 193 / 255

Resetting the P-touch

183

Resetting Data Using the Settings in the Home screen

Select [

Settings

] in the Home screen using the , ,

key, and then press the

Enter

key.

Select [

Reset

] using the or key, and then press the

Enter

key.

Resetting Data Using the Printer Setting Tool

You can use the Printer Setting Tool from a computer to perform the following operations for the P-touch:



Resetting the tube cutter counter



Resetting the tube print length



Deleting the templates and databases



Deleting the print log



Resetting Wi-Fi settings



Resetting printer settings to factory settings

For more information, see

Changing the P-touch Settings

on page 94.

Value

Details

Reset All Settings

Transferred data (templates, databases, and transferred symbols), registered
programs and the contents in the file memory are NOT cleared.

Other data is cleared and all settings except the Wi-Fi settings are reset to
factory settings.

Erase All Content

Transferred data (templates, databases, and transferred symbols), registered
programs and the contents in the file memory are cleared.

Other data is NOT cleared and settings are NOT reset.

Factory Default

All data, customised settings, and the Wi-Fi settings are reset to factory
settings.

Reset Wi-Fi Settings

All Wi-Fi settings are reset to factory settings.

Reset Tube Cutter Counter

Resets the counter for the tube cutter.

Reset Tube Printing Meter

Resets the total length for the printed tubes.

Summary of Contents for P-Touch E850TKW
































































































































































































































































Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands

Brother P-Touch E850TKW, User Manual

Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands