manualshive.com logo in svg

Brother P-Touch E850TKW, User Manual

The Brother P-Touch E850TKW offers exceptional versatility and professional label printing. With its user-friendly interface, this high-quality label printer ensures precision and efficiency in any work environment. Discover the full potential of your device by downloading the free user manual from manualshive.com to maximize your labeling capabilities.

Share
Download
background image

Network Terms and Information 

227

25

Authentication and Encryption methods for an enterprise wireless network

25

An enterprise wireless network is a large network with IEEE802.1x support. If you configure your P-touch in 
an IEEE802.1x supported wireless network, you can use the following authentication and encryption 
methods:

Authentication methods

25

LEAP (For wireless network)
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. and 
uses a user ID and password for authentication.

EAP-FAST
EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunnel) has been 
developed by Cisco Systems, Inc. and uses a user ID and password for authentication, and symmetric key 
algorithms to achieve a tunnelled authentication process.
The printer supports the following inner authentication methods:

• EAP-FAST/NONE
• EAP-FAST/MS-CHAPv2
• EAP-FAST/GTC

PEAP
PEAP (Protected Extensible Authentication Protocol) has been developed by Microsoft Corporation, Cisco 
Systems and RSA Security. PEAP creates an encrypted SSL (Secure Sockets Layer)/TLS (Transport 
Layer Security) tunnel between a client and an authentication server, for sending a user ID and password. 
PEAP provides mutual authentication between the server and the client.
The printer supports the following inner authentication methods:

• PEAP/MS-CHAPv2
• PEAP/GTC

EAP-TTLS
EAP-TTLS (Extensible Authentication Protocol Tunnelled Transport Layer Security) has been developed 
by Funk Software and Certicom. EAP-TTLS creates a similar encrypt SSL tunnel to PEAP, between a 
client and an authentication server, for sending a user ID and password. EAP-TTLS provides mutual 
authentication between the server and the client.
The printer supports the following inner authentication methods:

• EAP-TTLS/CHAP
• EAP-TTLS/MS-CHAP
• EAP-TTLS/MS-CHAPv2
• EAP-TTLS/PAP

EAP-TLS
EAP-TLS (Extensible Authentication Protocol Transport Layer Security) requires digital certificate 
authentication both at a client and an authentication server.

Summary of Contents for P-Touch E850TKW
































































































































































































































































Reviews:

No comments

Related manuals for P-Touch E850TKW

Dash DMW001 Instruction Manual preview
DMW001
Brand: Dash Pages: 17
Dash DSIM100 Instruction Manual And Recipe Manual preview
DSIM100
Brand: Dash Pages: 28
Xiamen Hanin Electronic Technology iD4P User Manual preview
iD4P
Brand: Xiamen Hanin Electronic Technology Pages: 102
Carimali ETA BETA 1 GROUPS Installation - Use - Maintenance preview
ETA BETA 1 GROUPS
Brand: Carimali Pages: 53
TAKE-A-LABEL TAL-3100R Operation Manual preview
TAL-3100R
Brand: TAKE-A-LABEL Pages: 15
Saeco GranAroma SM6582 User Manual preview
GranAroma SM6582
Brand: Saeco Pages: 590
Farberware FTR700 Use And Care Instructions Manual preview
FTR700
Brand: Farberware Pages: 27
Rowenta 0827974 Manual preview
0827974
Brand: Rowenta Pages: 98
Wittenborg ES 7100 Quick Reference Manual preview
ES 7100
Brand: Wittenborg Pages: 12
Cascade CE102BM Instruction Manual preview
CE102BM
Brand: Cascade Pages: 4
Zwilling ENFINIGY 53103-3 Operating Instructions Manual preview
ENFINIGY 53103-3
Brand: Zwilling Pages: 136
TAKE-A-LABEL TAL-750HD Operating Instructions preview
TAL-750HD
Brand: TAKE-A-LABEL Pages: 3
Brady BMP 21-PLUS Quick Start Manual preview
BMP 21-PLUS
Brand: Brady Pages: 12
V-ZUG Supremo XSL Operating Instructions Manual preview
Supremo XSL
Brand: V-ZUG Pages: 52
Oster BVST-JBX Series User Manual preview
BVST-JBX Series
Brand: Oster Pages: 12
Yoo Digital PICKYOO User Manual preview
PICKYOO
Brand: Yoo Digital Pages: 40
Vitek VT-1514 BK Manual Instruction preview
VT-1514 BK
Brand: Vitek Pages: 25
Nespresso 704 Descaling Manual preview
704
Brand: Nespresso Pages: 5

Brands by name

Popular brands

Load more brands