Brother P-Touch E850TKW Page 89 User Manual Download

Page: 89 / 255

Printing Using the Computer



WPS (Wi-Fi Protected Setup™)

If your wireless access point/router supports WPS, you can configure settings and connections wirelessly.

First, confirm that your wireless access point/router has the WPS symbol.

Select [

Settings

] in the Home screen using the , ,

key, and then press the

Enter

key.

Select [

WLAN

] using the or key, and then press the

Enter

key.

Select [

Infrastructure Mode

] using the or key, and then press the

Enter

key.

Select [

Network Setting

] using the or key, and then press the

Enter

key.

Place your P-touch within the range of your wireless access point/router. The range may differ
depending on your environment. See the instructions provided with your wireless access point/router.

Select [

Button Push

] using the or key, and then press the

Enter

key.

Press the

Enter

key for a message that appears before the [

Start WPS on Your Wireless

Access Point

The [

Start WPS on Your Wireless Access Point

] message appears.

Press the WPS button on your wireless access point/router, and then press the

Enter

key on

your P-touch.

Note

To return to the previous step, press the

Esc

key.

[

Connecting…

] appears for a while, and then [

Connected!

] appears.

Press the

Enter

key.

The screen returns to the [

Settings

] menu screen.

Depending on the strength of the wireless signal, the wireless connection indicator may show one of
the following symbols:

Note

• If you start the setup wizard for the Infrastructure mode or select the network settings for the Direct mode

when the wireless function of the P-touch is turned off, [

Turning on Wi-Fi Radio

] appears and the

wireless function turns itself on automatically (or after the

key is pressed). It is no longer necessary to

turn the Infrastructure mode or Direct mode on manually.

• Your P-touch will try to connect using WPS for two minutes. If the

(Wi-Fi) button is pressed and held

during that time, the P-touch will continue trying to connect for an additional two minutes.

• If your P-touch could not connect to the network, a message indicating that the connection failed appears.

Summary of Contents for P-Touch E850TKW
































































































































































































































































Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands

Brother P-Touch E850TKW, User Manual

Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Related manuals for P-Touch E850TKW

Brands by name

Popular brands