Brother P-Touch E850TKW User Manual Download Page 134

Page: 134 / 255

Other Functions

124

Click [

] to close the [

Distributed Printing Settings

] window.

Setup is completed.

Click [

] to start distributed printing.

Note

• It may not be possible for information to be detected for a printer connected using a USB hub or print

server. Before printing, enter the settings manually, and check if the printer can be used for printing.

• Depending on whether a router is used and the security features in use, such as a firewall, it may not be

possible to use this function.

• We recommend performing a connection test for your operating environment. Contact your information

technology manager or administrator for assistance.

Summary of Contents for P-Touch E850TKW
































































































































































































































































Search results

Summary of Contents for P-Touch E850TKW

Reviews:

Brother P-Touch E850TKW, User Manual, Page: 134 / 255

Search results

Summary of Contents for P-Touch E850TKW

Reviews: