Brother P-Touch E850TKW User Manual Download Page 16 | Manualshive

Page: 16 / 255

Brother P-Touch E850TKW User Manual Download Page 16

Setting Up the P-touch

6

1

Inserting a Tube

1

a

Press the cover open button to open the top cover.

b

Pull the tube release lever up.

c

Pass the tube as shown in the illustration so that the end of the tube reaches the “

” mark on the

P-touch, and then push the tube release lever down.

d

Close the top cover.

Note

• When using the P-touch, position it so direct sunlight does not enter the P-touch through the tube exit slot.
• You can use the tube half-cut adjuster to adjust the depth of half cuts to one of three settings.

• If the tube is jammed or not cut completely, use the

(Feed and Cut) button to manually cut the tube

completely. Press and hold the button for 2 to 10 seconds until the (Power) indicator changes from
being lit in green to flashing in green, and then release it. The tube will be cut when the button is released.

«
...
14
15
16
17
18
...
»

Summary of Contents for P-Touch E850TKW
































































































































































































































































Reviews:

No comments