Brother P-touch 2600, User Manual

Page: 101 / 250

94
EXAMPLE
Although the length of the printed label automatically adjusts to fit the length of the entered
text, there may be times when you will want to make a label with a specific length. The
Length
function allows you to set the label length between 1.6” and 11.8” (4.0 cm and 30.0 cm).
The default length setting is
OFF . When the Length function is set to ON , the Length indicator
on the right side of the display comes on.
☞
The label length setting is only applied to labels printed on TZ tape. The label
length of AV labels cannot be adjusted.
To turn the Length function on or off:
1 While holding down
c
, press
T
once, and keep
c
held down to display the cur-
rent length of the label (the text and both margins). Then, the display will show the cur-
rent label length setting (
ON or OFF ).
2 While still holding down
c
, continue pressing
T
until the desired label length setting
is displayed.
☞
The Length indicator comes on when ON is selected.
3 Release
c
. If ON was selected, the current label length setting is displayed.
4 Press
e
or
h
to select the desired length or use the number keys to enter a length.
☞
To change the units (inches or centimeters) used to display the label length, press
M
until the desired units are displayed.
To change the length in 1” (1.0-cm) steps, hold down either
e
or
h
, and then
release the key when the desired setting is displayed.
To select the ON mirror printing setting:
1
While holding down
c
, press
p
once, and
keep
c
held down.
2
While still holding down
c
, continue pressing
p
until ON is displayed.
3
Release
c
.
O F F
M I R R O R
A B C
O N
M I R R O R
A BC
LENGTH FUNCTION
TZ-T
ape
AV
-Label