Scan Using the Control Panel
171
7
D
In the
Margin Settings
, enter -3 to 3 to add or remove a specific margin at the edge of the image.
E
Set
Auto Deskew
to
Auto
to correct the skew (less than 0.36 in. (9 mm) from the center of the
document to the edge) of the scanned data.
F
Set
Skip Blank Page
On
to remove blank pages of the document from the scanned data.
G
Select -5 to 5 from the drop-down list to adjust the
Skip Blank Page sensitivity
.
H
Select
Continuous Scan
to
On
to continue scanning.
I
Set the
Passive Mode
option to off or on depending on your FTP server and network firewall configuration.
The default setting is
On
. In most cases this setting does not need to be changed.
J
Change the
Port Number
setting used to access the FTP server. The default for this setting is port 21.
In most cases this setting does not need to be changed.
K
Click
Submit
.
1
Depending upon the condition of the original document, this function may not work properly.
NOTE
Using the following characters: ?, /, \, ", :, <, >, | or * may cause a sending error.
Summary of Contents for ImageCenter ADS-2400N
Page 37: ...General Information 21 1 3 Select Initial Setup in the folder tree Windows ...
Page 41: ...General Information 25 1 3 Select General Setup in the folder tree Windows ...
Page 45: ...General Information 29 1 3 Select Language in the folder tree Windows ...
Page 256: ...Routine Maintenance 240 9 4 Firmly push the Output Tray into the machine ...
