Brother DCP-L8410CDW, Online User'S Manual

Page: 564 / 764

Error Message Cause Action
Supplies
Replace Drum
It is time to replace the drum
unit. Replace the drum unit with a new one.
The drum unit counter was not
reset when a new drum was
installed. Reset the drum unit counter.
See the instructions included with the new drum
unit.
Replace Toner
The toner cartridge is at the end
of its life. The machine stops all
print operations.
While memory is available,
faxes are stored in the memory. Replace the toner cartridge for the colour
indicated on the LCD.
Replace WT Box It is time to replace the waste
toner box. Replace the waste toner box with a new one.
Scan Unable The document is too long for
2
‑
sided scanning.
Press . For 2-sided scanning, use A4 size
paper. Other paper must be within the following
size:
Length: 147.3 to 355.6 mm
Width: 105 to 215.9 mm
Scan Unable
## The machine has a mechanical
problem.
• Press and hold to turn the machine off,
and then turn it on again.
• If the problem continues, contact Brother
customer service.
Self-Diagnostic The temperature of the fuser
unit does not rise to a specified
temperature within the specified
time.
Press and hold to turn the machine off, wait a
few seconds, and then turn it on again. Leave the
machine idle for 15 minutes with the power on.
The fuser unit is too hot.
Service Error
## Machine's firmware has a
problem. • Contact Brother customer service.
Short paper The length of the paper in the
tray is too short for the machine
to deliver it to the Face down
output tray. Open the back cover (Face up output tray) to let
the printed page exit onto the Face up output tray.
Remove the printed pages, and then press
Retry
.
Size Error The paper size defined in the
printer driver is not supported
by the defined tray. Choose a paper size supported by the defined
tray.
Size Error 2-sided The paper size specified in the
machine's paper size setting is
not available for automatic 2-
sided printing.
Press (if required).
Load the correct size of paper in the tray and set
the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper size available for automatic 2-sided printing
is A4.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Size Mismatch The paper in the tray is not the
correct size. Load the correct size of paper in the tray
indicated on the LCD and set the size of paper for
the tray.
Supplies
Belt End Soon The belt unit is near the end of
its life. Order a new belt unit before the LCD displays
Replace Belt
.
Supplies
Replace Belt It is time to replace the belt unit. Replace the belt unit with a new one.
557