Brother DCP-L8410CDW, Online User'S Manual

Page: 562 / 764

Error Message Cause Action
Jam Inside
The paper is jammed inside the
machine. Open the front cover, remove the toner cartridge
and drum unit assembly, and pull out all jammed
paper. Close the front cover.
Jam MP Tray The paper is jammed in the MP
tray. Remove all jammed paper from in and around the
MP tray. Press
Retry
.
Jam Rear The paper is jammed in the
back of the machine. Open the fuser cover and remove all jammed
paper. Close the fuser cover. If the error message
remains, press
Retry
Jam Tray 1
Jam Tray 2
Jam Tray 3
Jam Tray 4 The paper is jammed in the
indicated paper tray. Pull out the paper tray and remove all jammed
paper as shown in the animation on the LCD.
Limit Exceeded The print limit set in Secure
Function Lock 3.0 was reached. Call your administrator to check your Secure
Function Lock Settings.
Media Type Mismatch The media type specified in the
printer driver differs from the
paper type specified in the
machine's menu. Load the correct type of paper in the tray
indicated on the LCD, and then select the correct
media type in the Paper Type setting on the
machine.
No Belt Unit The belt unit is not installed or
not installed correctly. Reinstall the belt unit.
No HUB Support A USB hub device is connected
to the USB direct interface. Disconnect the USB hub device from the USB
direct interface.
No Drum Unit The drum unit is not installed
correctly. Reinstall the toner cartridge and drum unit
assembly.
No Paper The machine is out of paper, or
paper is not loaded correctly in
the paper tray. • Refill paper in the paper tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
• Do not overfill the paper tray.
No Paper Fed T1
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4 The machine failed to feed
paper from the indicated paper
tray. Pull out the paper tray indicated on the LCD and
remove all jammed paper.
No Paper MP The MP tray is out of paper, or
paper is not loaded correctly in
the MP tray. Do one of the following:
•
Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
No Paper T1
No Paper T2
No Paper T3
No Paper T4 The machine failed to feed
paper from the indicated paper
tray. Do one of the following:
•
Refill paper in the paper tray indicated on the
LCD. Make sure the paper guides are set to
the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
Do not overfill the paper tray.
No Toner The toner cartridge for the
colour indicated on the LCD is
not installed or not installed
correctly. Remove the toner cartridge for the colour
indicated on the LCD from the drum unit, and put
the toner cartridge back into the drum unit. If the
problem continues, replace the toner cartridge.
555