Brother DCP-7010 Page 166 Service Manual Download

Page: 166 / 327

8 - 9

Confidential

8.4.4 ADF Performance Test (Function code 08)

Function

The machine counts the documents fed by the automatic document feeder (ADF) and
displays the count on the LCD for checking the ADF performance.

Operating

Procedure

(1) Set documents. (Allowable up to the ADF capacity.)

The "DOC. READY" will appear on the LCD.

(2) MFC7420/7820

Press the

and

keys in this order.

DCP7020/7025

Press the key or key several times to display the “MAINTENANCE 08” code on
the LCD. Then press the

Set

key .

While counting the documents, the machine feeds them in and out, displaying the
current count on the LCD as shown below.

Current count (1st page in this example)

(3) To return the machine to the initial stage of the maintenance mode, press the

Stop/Exit

key.

Summary of Contents for DCP-7010








































































































































































































































































































































Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands

Brother DCP-7010, Service Manual

Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands