Brother DCP-7010, Service Manual

Page: 24 / 327

2 -3
Confidential
(4) Recommended paper
Europe USA
Plain paper Xerox Premier 80 g/m
2
Xerox Business 80 g/m
2
Modo Paper DATACOPY 80 g/m
2
IGEPA X-press 80 g/m
2
Xerox 4200DP 20lb
Xerox 4024 28lb
Hammermill Laser Paper 24lb
Recycled paper
Xerox Recycled Supreme N/A
Transparency
3M CG3300 3M CG 3300
Label Avery laser label L7163 Avery laser label #5160
* This printer can use recycled paper that meets the DIN 19309 specification
CAUTION:
When you are choosing print media, be sure to follow the information given below to prevent
any paper jams, print quality problems or printer damage;
•
It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.
•
Use neutral paper. Do not use acid paper to avoid any damage to the drum unit.
•
Avoid using coated paper such as vinyl coated paper.
•
Avoid using preprinted or highly textured paper.
•
It is recommended to use labels or transparencies which are designed for use in laser
printers.
•
Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged.
•
Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
•
Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the printer.
•
When printing on the back of pre-printed paper, if the paper is curled, be sure to
straighten the paper as much as possible.
Different types of paper should not be loaded at the same time in the paper tray to avoid any
paper jams or misfeeds.
(5) Paper tray capacity
Paper Tray
Manual feed slot
Paper Capacity 250 sheets (80 g/m
2
or 21lb) Single sheet
(6) Print delivery
Face down output tray
capacity: Maximum 100 sheets (80 g/m
2
)
face down only
NOTE:
Face-down: Delivery with the printed face of the paper downwards.