2-32
Confidential
Size Error DX
Press Stop Key.
Specify the correct
paper and load the
same size paper as
the Printer driver
setting.
For 2-sided printing, paper size
setting of the printer driver that
was not supported by 2-sided
printing was selected.
Specify the correct
paper.
The registration rear sensor
detected that the paper fed was
smaller or larger than the
specified size in duplex printing
mode.
Size mismatch Fax received. Set
correct paper size
in menu.
Paper size is not set as A4/
Letter/Legal/Folio when
receiving fax or printing a list/
report.
Reload correct
paper in the MP
Tray, then press
Start.
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when paper is fed from the MP
tray.
Reload correct
paper in Tray1, then
press Start.
The size of paper loaded in the
paper tray and the one specified
from the driver are not same
when paper is fed from the
paper tray.
Reload correct
paper, then press
Start.
Detected that the size of paper
set in the paper tray was over
10 mm shorter than paper size
set in the machine during faxing
or printing a list or report.
Toner Ended
Open the Front
Cover, replace
Toner Cartridge.
Toner cartridge in models
without toner box has reached
the upper limit in the continuous
printing mode.
Toner Low
-
Dot counter of the toner
cartridge or develop roller
counter reaches the upper limit
soon.
The amount of toner supplied of
the toner box reaches the upper
limit soon.
Error message
Description
Error
codes
Refer
to:
Initial display
Scroll
Summary of Contents for DCP-2537DW
