1
BAS-6150
Thank you very much for buying a BROTHER sewing machine. Before using your new machine,
please read the safety instructions below and explanations given in the instruction manual.
The nature of industrial sewing machine requires operators to be always exposed to the hazard
to themselves, because they have to work very close to moving parts such as the needle and
thread take-up lever. Prior to using, be sure to be well informed of instructions for safe and
correct operation of the machine by experts and/or instructors.
1 Safety indications and their meanings
This instruction manual and the indications & symbols labeled on the machine are provided to ensure safe
operation of this machine and to prevent hazards from an operator and/or other people. The meanings of these
indications and symbols are given below.
SAFETY INSTRUCTIONS
Indications
The instructions following this term indicate situations where
negligence of the instructions will almost certainly result in death
or severe injury.
The instructions following this term indicate situations where
negligence of the instructions to operation could cause hazards
to the material and body.
Symbols
............
This symbol (
) indicates what an operator must be careful of.
The picture inside the triangle indicates the nature of the caution that must be observed. (For
example, the symbol on the left means "beware of injury".)
..............
This symbol (
) indicates what you must not do.
..............
This symbol (
) indicates what you must do.
The picture inside the circle indicates what must be done. (For example, the symbol on the
left means "you must set the ground connection".)
DANGER
CAUTION
Summary of Contents for BAS-6150
