Brother BAS-6150, Instruction Manual

Page: 44 / 107

Chapter 3 Settings
42
BAS-6150
1 to 5 needles
15 - 45m/min (5m/min pitch)
15 - 40m/min (5m/min pitch)
By setting to ON, the carriage feed moves to the cloth set
position as the feed holds the cloth and releases it when the
stacker is not used.
NO. Item Display Contents (configurable values)
1
30
30
13
14
15
16
17
18
19
20
21
22
23
24
25
Initial
values
Rear
Middle
Front
Needle drop number on the
same spot -for end of
sewing
Sewing reference position
Needle up at start of sewing
Stacker
Operational order of
clamping
Clamp movement speed -
sewing start position
Clamp movement speed -
corner knife position
Setting position of clamp
movement
Pick up operation mode
Carriage feed movement at
pick up return
Application of pressure
after T-gauge goes down
Settings for folding plate
Folding plate movement at
corner knife up
Not used
Used
(Automatic sensing)
Right to left
Left to right
Concurrent movement of right and left
The position where the clamp moves after sewing
Standby position
Cloth set position
Left
Right
Left and right
No air compression
High air compression
Low air compression
Not used
Only left used
Only right used
Both used
Not used
Used
Both open
Only left open
Only right open
Both used