Brother BAS-6150, Instruction Manual

Page: 79 / 107

Chapter 7 Environment setting
BAS-6150
77
8, 10, 12, 14, 16, 18, 20 (22, 24, 26) mm (2mm pitch)
Be sure to confirm the right kind of corner knife is used after
setting change. (Refer to the Table 1.)
10 to 300
Corner knife edge clearance at the time of home position
detection.
(Automatic update is performed by setting the needle gauge.
Refer to the Table 2.)
0 to 465.0 mm
Distance between the needle drop position and the corner
knife front end.
(Automatic update is performed by setting the needle gauge.
Refer to the Table 2.)
0.0 to 9.9 sec (in the unit of 0.1 sec)
Standby time from the corner knife ON to OFF.
0.0 to 9.9 sec (in the unit of 0.1 sec)
Standby time from the corner knife OFF to the presser UP.
0.0 to 9.9 sec
0.0 to 9.9 sec
15 to 45m/min (5m/min pitch)
15 to 40m/min (5m/min pitch)
15 to 40m/min (5m/min pitch)
15 to 40m/min (5m/min pitch)
-9.9 to 9.9mm (in the unit of 0.1 mm)
0
1
2
3
4
5
6
7
8
9
10
11
12
12
—
—
0.2
0.2
0.3
0.0
30
30
30
30
0.0
NO. Item Display Contents (configurable values)
List of environment parameters
Initial
value
Needle gauge
Edge clearance of corner
knives
Corner knife position
Standby timer after the
corner knife up
Standby timer after the
corner knife down
Automatically down after
the presser moves to the
cloth set position
Timer for afrautomatically
standby for down ON time
after the presser moves to
the cloth set position
Timer for the next move-
ment after the carriage feed
down
Movement speed to the
cloth set position
Movement speed to the
stacker position
Movement speed to the
standby position
Movement speed to the
feed position
Center knife offset - start of
sewing correction