Brother 884-T20 Operation Manual Download Page 176

Page: 176 / 244

174

Touch .

Type “ood”.

Touch the tab for lowercase letters to display the
lowercase letters input screen, and then touch “o”,
“o”, then “d”.



The selected letters appear at the center of the
embroidery area.

• To change the size of the pattern, select “o”, and then

touch

to select the desired size.

• To change the text arrangement, touch

, and

then select the desired text arrangement.

Type

to enter a line feed.

Type “Job”.

Touch

to align the text to the left.

After selecting the characters, touch



The pattern editing screen appears.

Touch

and adjust the position of

the letters so that they are well balanced.

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands