Brother 884-T20 Operation Manual Download Page 139

Page: 139 / 244

SELECTING/EDITING/SAVING PATTERNS

137

Turn on your computer and select
“Computer (My Computer)”.

Touch

when the pattern you want to

save is in the embroidering settings screen.

Touch .

Touch

to return to the original screen without

saving.



The pattern will be temporarily saved to
“Removable Disk” under “Computer (My
Computer)”.

Select the pattern’s .phc file in “Removable
Disk” and copy the file to the computer.

Retrieving patterns from the
machine’s memory

Press .



The machine displays the patterns currently in the
memory.

Touch the key of the pattern you want to
retrieve.

Touch .

Touch

to delete the embroidery pattern.



The embroidering screen is displayed.

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands