Brother 884-T20 Operation Manual Download Page 100

Page: 100 / 244

■

Specifying a stitch number

In step

on page 97, touch

Use the number keys to enter the desired
stitch number, and then touch



The embroidery frame moves to the specified stitch.

Touch

to return to the previous screen,

and then continue with step

If the bobbin thread breaks or
runs out

Touch

, and then press the thread

trimming button.



The upper thread is trimmed.

• If the bobbin thread breaks or runs out, also trim the

upper thread.

Remove the stitches sewn only with the
upper thread.

Pull the trim end of the upper thread.

• If the stitches cannot be cleanly removed, trim the

thread with scissors.

Memo

• Touch

to reset the stitch number and

embroider from the first stitch.

• To specify the last stitch number, select the

last thread color, and then touch

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands