Brother 884-T20 Operation Manual Download Page 147

Page: 147 / 244

SELECTING/EDITING/SAVING PATTERNS

145

To change the embroidering settings for the
opened embroidery pattern, touch

• Touch

when the following message appears.

Touch

to return to the embroidering screen.



The embroidering settings screen appears.

After the desired settings have been
specified, touch

to return to the

embroidering screen.

Touch

, and then press the start/stop

button to start embroidering.



When embroidering is finished, the following
message appears.

To open another pattern sent from the

computer, touch

, and then repeat the

procedure starting from step

to continue

embroidering.

To stop embroidering or to embroider the same pattern

again, touch

Disabling the Link function

Touch

, and then touch

and

display page 5 of the settings screen.

Touch

to disable the Link function.



When the following message appears, touch

Turn off the machine.

Note

• The embroidering screen settings specified

in step

are saved even if

was

touched to continue sewing after
embroidering is finished.

Memo

• If the embroidery machine is turned off

while it is embroidering, the resume
operation can be used the next time it is
turned on.

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands