Brother 884-T20 Operation Manual Download Page 172

Page: 172 / 244

170

Saving and recalling the custom
thread table using USB media

You can save a custom thread table data file to
USB media, and then you can recall the saved
data from USB media again.

■

Saving the custom thread table in
USB media

Insert the USB media into the USB port on
the right side of the machine.

For details on connecting USB media, refer to
“Using USB media” on page 75.

USB ports

USB media

Touch

and then touch

Press .

Touch

, and then select the port where

the data is to be saved.



The “Saving…” screen is displayed. When the data
is saved, the display returns to the original screen
automatically.

■

Recalling the custom thread table in
USB media

Insert the USB media containing the custom
thread table data into the USB port for
media.

Touch

and then touch

Touch .



The “Saving…” screen is displayed. When the data
is loaded to the machine, the display returns to the
original screen automatically.

Note

• Custom thread table data can only be saved

to USB media. You cannot save the data in
the machine’s memory or in the computer.

• Custom thread table data is saved as “.pcp”

data file.

Note

• Do not insert or remove USB media while

“Saving…” screen is displayed. You will
lose some or all of the data you are saving.

Note

• You can only recall one custom thread table

data at a time. Do not store two or more
“.pcp” data file in USB media.

Note

• Do not insert or remove USB media while

“Saving…” screen is displayed. You will
lose some or all of the data you are saving.

• To delete all the specified colors from the

custom thread palette, touch

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands