Brother 884-T20 Operation Manual Download Page 127

Page: 127 / 244

SELECTING/EDITING/SAVING PATTERNS

125

In the pattern category list screen, which
appears next, touch the desired pattern
category to select it.

In the pattern list screen, which appears
next, touch the desired pattern to select it.

■

Pattern list screen

Pattern keys
Touch a pattern to display the following
information of the pattern.

Vertical length of the pattern

Horizontal width of the pattern

Number of thread color changes

If there is more than one page, touch

until the desired page is displayed.

Touch

to return to pattern type selection

screen to change category.

Touch to confirm the pattern, and move to the
pattern editing screen.

■

Changing the size of pattern keys

The size of pattern keys can be set to “Small”,
“Medium” or “Large”.
When the embroidery machine is purchased,
“Medium” is selected.

“Large” pattern key size

“Small” pattern key size

Embroidery patterns

Touch .



The embroidery pattern categories appears.

Memo

• If there are multiple pages in the pattern list,

drag your finger up and down in the pattern
area to scroll through the pages.

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands