Brother 884-T20 Operation Manual Download Page 170

Page: 170 / 244

168

Use

to enter a color’s 4-digit number.

• If you make a mistake, touch

to erase the

entered number, and then enter the correct number.

Entered thread color number

Thread brand

Touch .

Selected thread color



The selected thread color is set in the custom thread
table.

Repeat the previous steps until all desired
thread colors are specified.

• To delete a specified thread color from the palette,

touch .

• To delete all specified thread colors from the palette,

touch .

Touch

to return to the original

screen.

■

Adding a color to the custom thread
table from the list

Repeat the previous step

on page 167.

Touch

to display the thread list.

Use

to select a thread color.

Thread list

Thread brand

Touch .

Note

• If

is not touched, the thread color

number will not be changed.

Note

• When setting up custom thread table, touch

or touch the next

square directly to set the next color after
each selection. Machine will not advance to
the next square automatically.

Summary of Contents for 884-T20





















































































































































































































































Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands

Brother 884-T20, Operation Manual

Search results

Summary of Contents for 884-T20

Reviews:

Related manuals for 884-T20

Brands by name

Popular brands