Brother 2400c - Color Laser Printer User Manual Download Page 132

Page: 132 / 280

CHAPTER 4 CONTROL PANEL

4–69

4. Press the

Set

button to make the displayed selection effective.

The printer is reset according to the selected reset mode.

Selected Mode

LCD message on the upper row

RESET PRINTER

08 RESET TO

USER SETTINGS

RESET SETTING 1-2

08 RESET TO

SETTING # 1*

FACTORY SETTINGS

09 RESET TO

FACTORY

SETTINGS

1* - # indicates the selected number of saved settings

The printer automatically exits from the reset mode to the on-line
state.

5. When you enter the RESET PARTS LIFE mode;

LCD Message on the lower row

Parts replaced

FC ROLLER

Fuser Cleaner

OPC BELT

(OPC) Belt Cartridge

FUSER UNIT

Fixing Unit

120K KIT

Drum Cleaner, Paper discharger,
Transfer Roller

The reset item is selected according to the Maintenance message that
shows the currently recommended maintenance part to replace. Press

Set

to reset the parts life.

List of Factory Settings

The following table shows the factory settings made before shipment.

✒

Notes

The settings are subject to the emulation mode. Effective modes are
indicated in parentheses in the following table.

The following settings cannot be restored to the factory settings with
the

Reset

button in the “FACTORY SETTINGS” mode:

INTERFACE MODE, HRC SETTING, PAGE PROTECTION,
SCALABLE FONT, LOCK PANEL, and PAGE COUNTER, and
local language for display messages.

The COPY setting is always restored to the factory setting when the
printer is turned off and on again.

The user settings are overwritten after resetting to setting 1 or 2.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands