manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 147 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 147

USER’S GUIDE

5-6

  Oil Bottle

  Oil Bottle Low Message

When the Oil has nearly run out, the following message appears on the
LCD panel. You need to prepare a new Oil Bottle to replace the nearly
empty bottle. After this message appears, you can print approximately 30
pages.

  

FUSER OIL LOW

  
  Oil Bottle Empty Message

When the Oil runs out, the following message appears on the LCD panel
and the printer stops printing. When you see this message, you need to
replace the Oil Bottle with a new one.

23 OIL EMPTY

 Warning

The Fusing unit and the parts around it are HOT. Be sure to wait
about 30 minutes before you start replacing the Oil Bottle.
If you touch the HOT parts, you might get injured.

!

Caution

Be careful not to spill the oil inside the printer. It might cause damage to
the printer and void your warranty. If you spill any oil, consult your
dealer or our authorized service representative.

  Replacing the Oil Bottle

1. Press the 

Power

 button to turn the printer off and wait until it cools

down.

2. Open the Top cover.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments