Brother 2400c - Color Laser Printer User Manual Download Page 2 | Manualshive

Page: 2 / 280

background image

USER’S GUIDE

ii

Trademarks

Brother is a registered trademark of Brother Industries, Ltd.

Apple and LaserWriter are registered trademarks, and TrueType is a trademark of
Apple Computer, Inc.
Centronics is a trademark of Genicom Corporation.
EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko
Epson Corporation.
Hewlett-Packard, HP, PCL5C and PCL are registered trademarks, and HP
LaserJet 4+, HP LaserJet Plus, HP LaserJet II, HP LaserJet IID, HP LaserJet IIID,
HP-GL, HP-GL/2, and Bi-Tronics are trademarks of Hewlett-Packard Company.
IBM, Proprinter XL, Proprinter, and IBM/PC are registered trademarks of
International Business Machines Corporation.
Intellifont is a registered trademark of AGFA Corporation, a division of Miles,
Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States
and other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.

All other brand and product names mentioned in this user’s guide are registered
trademarks or trademarks of respective companies.

Compilation and Publication

Under the supervision of Brother Industries Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to
change without notice.

Brother reserves the right to make changes without notice in the specifications
and materials contained herein and shall not be responsible for any damages
(including consequential) caused by reliance on the materials presented, including
but not limited to typographical and other errors relating to the publication.

©1997 Brother Industries Ltd.

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any
damage during transit. It is recommended that you save and use the original packaging. The
Printer should also be adequately insured with the carrier.

WARNING

When shipping the Printer, the TONER CARTRIDGES and ALL CONSUMABLES must
be removed from the Printer. Failure to remove the CONSUMABLES during shipping
will cause severe damage to the Printer and will VOID THE WARRANTY (refer to
user’s manual).

«
1
2
3
4
...
»

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments

Related manuals for 2400c - Color Laser Printer

SPP 2020 - Photo Printer - 20 Sheets

Brand: Samsung Pages: 81

Brand: Samsung Pages: 98

Brand: Samsung Pages: 6

Brand: Samsung Pages: 203

Brand: Samsung Pages: 264

Brand: Samsung Pages: 228

Brand: Samsung Pages: 211

Brand: Samsung Pages: 5

Brand: Samsung Pages: 92

Brand: Samsung Pages: 75

Brand: Samsung Pages: 11

Brand: Samsung Pages: 206

ML 3050 - B/W Laser Printer

Brand: Samsung Pages: 103

ML 3050 - B/W Laser Printer

Brand: Samsung Pages: 215

Brand: Samsung Pages: 2

CLP 510N - Color Laser Printer

Brand: Samsung Pages: 266

550N - CLP Color Laser Printer

Brand: Samsung Pages: 296

Brand: Samsung Pages: 276

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands