manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 152 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 152

CHAPTER 5 MAINTENANCE

5-11

  Waste Toner Pack

Approximately every 12,000 pages you print, you need to change the
Waste Toner Pack.

  Waste Toner Pack Full Message

When the West Toner Pack becomes full, the following message appears
on the LCD panel and the printer stops printing. When you see this
message, you need to replace the Waste Toner Pack.

22 WASTE TONER

!

Caution

Do not re-use the Waste Toner Pack.

  Replacing the Waste Toner Pack

 Warning

 Do not put the Waste Toner Pack containing toner into a fire. It

might cause an explosion.

 Be careful not to spill the toner. Do not inhale the toner or allow it

to get into your eyes.

!

Caution

Be careful when you handle the Waste Toner Pack so that toner will not
spill on your hands or clothes.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments