manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 189 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 189

USER’S GUIDE

6–10

After you have followed the instructions, the printer automatically
resumes printing. However, the 

Data 

LED may come on and the

following message may appear on the display.

07 FF PAUSE

After a paper jam has occurred, data usually remains in the printer
memory. The message prompts you to execute a form feed and print out
the remaining data. Press the 

Set 

button to continue.

■

Paper Jam at Paper Exit

13 JAM REAR

If paper has passed behind the Rear Access Cover and a paper jam has
occurred at the paper exit, follow the steps below;

1. Open the Top Cover and release the Pressure Release Lever.

Fig. 6-2  Paper Jam at Paper Exit

2. Open the Rear Access Cover and remove the jammed paper by pulling

it out slowly.

Fig. 6-3  Remove the jammed paper

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments