Brother 2400c - Color Laser Printer User Manual Download Page 172 | Manualshive

Page: 172 / 280

background image

CHAPTER 5 MAINTENANCE

5-31

✒

Note

Do not load B5 or smaller size paper and envelopes in the cassette which
is loaded into the optional Lower Tray Unit. It might cause paper jams.

Font Card, Flash Memory/HDD Card

Installing a Font Card, Flash Memory Card and HDD Card

This printer has two slots for an optional font cartridge and one slot for an
optional font card, flash memory card or HDD card. (Type III HDD cards
will only fit into card slot 2.)

If you have installed optional font card(s), you can use the fonts stored in
them as well as the resident fonts. For optional font cards, consult the
dealer where you purchased the printer.

If you have installed an optional flash memory card or HDD card, you
can save macros and fonts on it. For flash memory card and HDD card
operations and information, see “CARD OPERATION” in Chapter 4.

✒

Notes

Do not install or remove cards with the printer power on, or you may
lose all data from the card, or may seriously damage the card.

For more information about the cards, consult the dealer where you
purchased the printer.

For the latest information:

http://www.brother.com

Follow these steps to install or remove a cartridge/card:

1. Make sure that the printer is turned off.

If the printer is turned on, be sure to press the

Sel

button to set the

printer off-line. If data remains in the printer memory, the

Data

LED

stays on. Press the

Form Feed

button to print out the remaining data,

then the

Data

LED goes off. Turn off the printer.

2. Insert an HDD card into slot 2 with the label facing to the right. It is

not possible to fit a card into slot 1 with a Type III PCMCIA card
fitted in slot 2.

3. Fit a flash memory or font card into either slot 1 or slot 2 with the

label facing to the right. Make sure they are inserted correctly.

To remove a card, pull it out of the slot with the printer turned off.

«
...
170
171
172
173
174
...
»

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments

Related manuals for 2400c - Color Laser Printer

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 341

Brand: Samsung Pages: 8

CLX2160N - Color Laser - All-in-One

Brand: Samsung Pages: 118

CLX 3160FN - Color Laser - All-in-One

Brand: Samsung Pages: 142

CLP-770ND - Color Laser Printer

Brand: Samsung Pages: 2

CLP 610ND - Color Laser Printer

Brand: Samsung Pages: 114

Brand: Samsung Pages: 6

Brand: Samsung Pages: 15

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 227

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 118

CLP 300N - Network-ready Color Laser Printer

Brand: Samsung Pages: 94

CJX-2000FW Series

Brand: Samsung Pages: 2

4116 - SCX B/W Laser

Brand: Samsung Pages: 205

3561ND - B/W Laser Printer

Brand: Samsung Pages: 252

3561ND - B/W Laser Printer

Brand: Samsung Pages: 127

Brand: Samsung Pages: 314

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands