manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 29 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 29

USER’S GUIDE

2–2

✒

   Note

An interface cable is not a standard accessory. Please purchase an
appropriate cable according to the interface you intend to use (parallel
cables should not exceed 1.8meters(6 feet)). The power cord may differ
slightly from this diagram depending on the country where you purchased
the printer.

✒

   Note

You may have additional parts not listed above depending on which
country you live in and theHL-2400C series model you have bought.

✒

   Note

We recommend you keep a spare of the following consumables at all
times, because when the following consumables reach their life, the
printer stops printing.
* Toner Cartridges (TN-01BK, TN-01C, TN-01M, TN-01Y)
* Waste Toner Pack (WT-1CL)
* Oil Bottle and Fuser Cleaner (FO-1CL, CR-1CL)

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments