Brother 2400c - Color Laser Printer User Manual Download Page 5

Page: 5 / 280

Warning

If metal objects, water or other liquids get inside the printer, turn the
printer off immediately and unplug the printer. Contact your dealer.

Warning

Do not put consumables such as the Toner Cartridges and the Waste
Toner Pack into a fire. Consumables are flammable under certain
conditions..

Warning

Do not look at the laser beam light directly. It might cause damage to
your eyesight.

Warning

Do not run the printer with the Top Cover, Front Cover and Rear
Access Covers open.

Warning

Be sure to turn off the printer before you exchange consumables.

Warning

Do not put anything on the printer.

Warning

If you spill the fuser oil, carefully wipe it up completely.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands